MSA 10207314 Instrucciones De Uso página 9

6. Place the tape on top of the tether just below the
web end and tightly wrap once around the tool to
secure the tether.
7. Continue wrapping by pulling and stretching the
tape tightly around the tool, overlapping each
time by at least half an inch.
8. Firmly press the end of the tape to the wrapped
tether to seal.
9. Connect to a suitable connector and pull to
ensure the tether is secure.
If using a Tool Tether Detachable Loop, connect
the hook end of the side release buckle to the
insertion end of the buckle on a Tool Tether
Carabiner Detachable Loop.
MSA Tool Tethers with Loops
US
9