Kit Assembly - Metra 99-3314G Instrucciones De Instalación

ISO DIN radio provision
1. Install the panel clips onto the
radio housing panel. (Figure A)
2. Attach the upper pocket with the
provided (4) #8 x 3/8" Phillips
screws. (Figure A)
3. Mount the pocket to the brackets
with the (4) #8 x 3/8" Phillips
screws supplied. (Figure B)
4. Attach the aftermarket radio to
the pocket/bracket assembly with
the screws supplied with the radio
(Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
6. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly using
the 99-3314G radio housing panel.

Kit Assembly

(Figure A)
99-3314G
(Figure B)
3
(Figure C)