• the protective grille is fitted when the inlet
port is not ducted (free intake).
• All versions of 100-125-150-160-200-200Q-250Q
appliances are fitted with a safety
overtemperature device.
• Versions of 250-315 appliances are equipped
with a manual-reset safety device to shut down
operation in the event of fault. If the device
cuts in, disconnect the appliance, allow it to
cool, eliminate the cause of the fault (e.g. grille
obstruction, fan fault, duct obstructions), then
reconnect the appliance. If the safety device
trips again, have the appliance checked by
Vortice*.
• The overtemperature and overload protection
of the Lineo 100 V0 - ES model is assured by
the fuse and the control electronics.
*(or an authorized Vortice dealer if you are outside the UK-Ireland territory)
13