ABB AMTD-1 Manual De Instrucciones página 16

Modular digital instruments
1. Settings
EN
EMT
Energy reset
Select the number "5" to irreversibly reset the counter.
The time it takes to update the measurement saved in the internal memory
is 15 minutes.
Select CT for indirect insertion
Values available for insertion with the CT: 60-100-250 -600-800-1000,
4 hyphens indicate a direct insertion up to 25A.
Active power visualization
1
1 If you briefly press on the front button, the letter P and the measure-
mentof active power absorbed by the load in kW will appear,flashing
alternately.
2 If you press the button again, or after 2 minutes of inactivity, the display-
returned to the fixed view of the energy counter.
12
kWh
2
kWh
2 min.
kWh