Amtd-1-R / Amtd-2-R - ABB AMTD-1 Manual De Instrucciones

Modular digital instruments
1. Adjustments and settings
EN

AMTD-1-R / AMTD-2-R

1
1 Press and hold the button for at least 3 seconds until the display flashes.
2 Press the button repeatedly until the indication of the parameter to set
appears.
3 Press and hold the button for at least 3 seconds to select the required
full scale.
4
2
A
> 3 sec.
Full scale setting [A]
Minimum alarm threshold [A]
Maximum alarm threshold [A]
Alarm tripping delay [sec.]
Alarm cutout hysteresis [%]
Alarm output configuration
Reset min and max values
3
A
> 3 sec.
A