Publicidad
Step 10
Carefully stand your unit upright.
å
We recommend using the FURNITURE TIPPING RESTRAINT KIT (99) for added stability. Fasten a bracket to the
å
center of the back edge of the TOP (E) and 1/4" down from the top edge using the 5/8" screw as shown.
Place your unit in its fi nal location against a wall.
å
Follow the instructions included in the KIT to fasten your unit to the wall.
å
Insert the METAL PINS (3) into the hole locations of your choice in the ENDS (A, B, C, and D).
å
Using your hammer, gently tap a CAM COVER (5) onto each visible HIDDEN CAM in the ENDS (A, B, C, and D).
å
Use the 5/8" screw through the
small hole in a bracket and into
the back edge of the TOP (A).
423399
Small hole
99
5
(18 used)
To cover HIDDEN CAMS
www.sauder.com
E
B
D
A
C
3
(12 used)
Page 13
Publicidad
