Sauder Hammond 423527 Manual De Instrucciones
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. Hammond 423527
  6. Manual de instrucciones
Sauder Hammond 423527 Manual De Instrucciones

Sauder Hammond 423527 Manual De Instrucciones

Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
sauder.com
L-Desk
Hammond Collection | Model 423527
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-445-1527.
Share your journey!
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-38
Français pg 39-43
Español pg 44-48
Lot #: 524327
Date Purchased: __________________
12/13/18
Be sure to give us a ring before
making any returns. 1-800-445-1527

Publicidad

Tabla de contenido
loading

Manuales relacionados para Sauder Hammond 423527

Resumen de contenidos para Sauder Hammond 423527

  • Página 1 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. FUTURE REFERENCE. Prefer the phone? Call 1-800-445-1527. English pg 1-38 Français pg 39-43 Español pg 44-48...

  • Página 2: Tabla De Contenido

    RIGHT BOTTOM (1) SMALL DRAWER FRONT (1) LARGE DRAWER BACK (1) LEFT MODESTY PANEL (1) DRAWER BOTTOM (3) RIGHT MODESTY PANEL (1) SMALL LEFT DRAWER SIDE (1) LEFT BACK LEG (1) SMALL RIGHT DRAWER SIDE (1) Page 2 www.sauder.com 423527...

  • Página 3: Part Identification

    While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. 423527 www.sauder.com Page 3...

  • Página 4: Hardware Identification

    CLIP - 4 GROMMET - 2 PIN - 4 GROMMET - 1 GROMMET CAP- 1 L-WRENCH - 1 MAGNETIC CATCH - 1 ADJUSTABLE GLIDE - 4 TIE PLATE - 3 STRIKE PLATE - 1 FILE BAR - 2 Page 4 www.sauder.com 423527...
  • Página 5 BLACK 5/8" FLAT HEAD SCREW - 44 NARROW BLACK 5/8" FLAT HEAD SCREW - 2 BLACK 1/2" FLAT HEAD SCREW - 18 NARROW BLACK 1/2" FLAT HEAD SCREW - 1 BLACK 1/2" MACHINE SCREW - 2 423527 www.sauder.com Page 5...
  • Página 6 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Turn sixteen CAM SCREWS (5) into the ENDS (C and F) and UPRIGHTS (D and E).
  • Página 7 Push twenty-six HIDDEN CAMS (3) into the ENDS (C and F), UPRIGHTS (D and E), BACKS (G), and BRACE (O). Arrow (26 used) Arrow Arrow Arrow Hole The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. 423527 www.sauder.com Page 7...
  • Página 8 Step 3 å Insert twenty-six LARGE WOOD DOWELS (6) into the edges of the ENDS (C and F) and UPRIGHTS (D and E), BACKS (G) and BRACE (O). (26 used) Page 8 www.sauder.com 423527...
  • Página 9 Push the release lever in and pull the SLIDE from the RAIL. BLACK 5/8" FLAT HEAD SCREW (18 used in this step) Open end The CAM SCREW should be here. Open end Open end The CAM SCREW should be Open end here. 423527 www.sauder.com Page 9...

  • Página 10: Left End

    NOTE: Be sure the WOOD DOWELS in the BACK and BRACE insert into the holes in the LEFT END. Remember: Righty tighty. Lefty loosey. Notch i t h f a c S u r D E N H I D Page 10 www.sauder.com 423527...
  • Página 11 RIGHT END. å Fasten the RIGHT UPRIGHT (E) to the BACK (G). Tighten two HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the BACK insert into the holes in the RIGHT UPRIGHT. 423527 www.sauder.com Page 11...

  • Página 12: Black 2-3/4" Hex Head Screw

    2. Fasten the FEET (Z) to the BOTTOMS (H and J). Turn sixteen BLACK 2-3/4" HEX HEAD SCREWS (22) with the L-WRENCH (16). å 3. Turn eight CAM SCREWS (5) into the BOTTOMS (H and J). (16 used) BLACK 2-3/4" HEX HEAD SCREW (16 used in this step) (8 used) Page 12 www.sauder.com 423527...

  • Página 13: Left Bottom

    NOTE: Be sure the WOOD DOWELS in the RIGHT END and RIGHT UPRIGHT insert into the holes in the RIGHT BOTTOM. å Insert a GROMMET (14) into the large hole in the RIGHT UPRIGHT (E) and LARGE GROMMET (13) into the large hole in the RIGHT BOTTOM (J) 423527 www.sauder.com Page 13...
  • Página 14 NOTE: The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. å Flip the LEFT BACK LEG (M) over. Turn three CAM SCREWS (5) into the LEFT BACK LEG (M). Arrow Arrow (3 used) Page 14 www.sauder.com 423527...

  • Página 15: Right Back Leg

    Turn the ADJUSTABLE GLIDES (20) completely into the threads in the short edges of the BACK LEGS (M and N). å The DESK can be adjusted up or down with the ADJUSTABLE GLIDES in the last step. 423527 www.sauder.com Page 15...
  • Página 16 NOTE: Be sure the WOOD DOWELS in the RIGHT BACK LEG insert into the holes in the LEFT BACK LEG. S u r f a c w i t h o u t H I D D E N Page 16 www.sauder.com 423527...
  • Página 17 NOTE: The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. Arrow Arrow Arrow Arrow Arrow (16 used) Arrow Hole The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. 423527 www.sauder.com Page 17...
  • Página 18 (2 used in this step) S u r f a c i t h H I D D E N D E N H I D i t h f a c S u r Notch Notch Page 18 www.sauder.com 423527...

  • Página 19: Black 1" Pan Head Screw

    15. å Fasten the MODESTY PANELS (L and K) to the BACK LEGS (M and N). Use eight BLACK 1" PAN HEAD SCREWS (24). Notch Notch BLACK 1" PAN HEAD SCREW (8 used in this step) 423527 www.sauder.com Page 19...
  • Página 20 Tighten three HIDDEN CAMS. å Fasten the LEFT UPRIGHT (D) to the LEFT MODESTY PANEL (K). Tighten three HIDDEN CAMS. å NOTE: Be sure the LARGE WOOD DOWELS in the MODESTY PANELS insert into the holes in the UPRIGHTS. Page 20 www.sauder.com 423527...
  • Página 21 Step Step 16 å You have the option to assemble your KEYBOARD SHELF (Q) to the left or right side of your L-Desk as shown. Keyboard on left Keyboard on right 423527 www.sauder.com Page 21...
  • Página 22 Turn CAM SCREWS into these additional four holes for the KEYBOARD on the left. Turn CAM SCREWS into these additional four holes for the KEYBOARD on the right. (32 used) Page 22 www.sauder.com 423527...
  • Página 23 Fasten the MAGNETIC CATCH (17) to the RIGHT TOP (B). Use two NARROW BLACK 5/8" FLAT HEAD SCREWS (27). BLACK 1" PAN HEAD SCREW (12 used for the TIE PLATES) NARROW BLACK 5/8" FLAT HEAD SCREW (2 used in this step) 423527 www.sauder.com Page 23...
  • Página 24 PLATES and into the LEFT TOP. å Push a LARGE GROMMET (13) and GROMMET CAP (15) into the large hole in the LEFT TOP (A). BLACK 1" PAN HEAD SCREW (12 used for the TIE PLATES) Page 24 www.sauder.com 423527...

  • Página 25: Black 5/8" Flat Head Screw

    å Fasten a KNOB SET (10) to the DOOR (U). Use a BLACK 1" MACHINE SCREW (25). BLACK 5/8" FLAT HEAD SCREW (4 used in this step) BLACK 1" MACHINE SCREW (1 used in this step) 423527 www.sauder.com Page 25...
  • Página 26 Fasten the DOOR (U) to the RIGHT END (F). Use eight BLACK 5/8" FLAT HEAD SCREWS (26). BLACK 5/8" FLAT HEAD SCREW (8 used in this step) NARROW BLACK 1/2" FLAT HEAD SCREW (1 used in this step) (4 used) Page 26 www.sauder.com 423527...
  • Página 27 Tighten the screws after making adjustments. å To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the DOORS in or out, as needed. Tighten the mounting screw after making adjustments. 423527 www.sauder.com Page 27...
  • Página 28 Insert four LARGE WOOD DOWELS (6) into the long edges of the KEYBOARD UPRIGHTS (R and S). Push the release lever in and pull the SLIDE from the RAIL. BLACK 5/8" FLAT HEAD SCREW (8 used in this step) Open end Open end Finished edge Page 28 www.sauder.com 423527...
  • Página 29 Fasten the RIGHT KEYBOARD UPRIGHT (S) to the LEFT MODESTY PANEL (K). Use two BLACK 1-3/8" FLAT HEAD SCREWS (23). å Go to step 26. Keyboard on left BLACK 1-3/8" FLAT HEAD SCREW (2 used in this step) 423527 www.sauder.com Page 29...
  • Página 30 The EXTENSION RAILS must be facing each other. å Fasten the LEFT KEYBOARD UPRIGHT (R) to the RIGHT MODESTY PANEL (L). Use two BLACK 1-3/8" FLAT HEAD SCREWS (23). Keyboard on right BLACK 1-3/8" FLAT HEAD SCREW (2 used in this step) Page 30 www.sauder.com 423527...
  • Página 31 SIDES (X, Y, BB, CC, FF, and GG). Side Step: Make nachos. (Optional, but recommended.) Arrow Arrow (10 used) Arrow Hole The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. 423527 www.sauder.com Page 31...
  • Página 32 Step 27 å Insert ten SMALL WOOD DOWELS (7) into the edges of the DRAWER SIDES (X, Y, FF, and GG) and LARGE DRAWER BACK (HH). (10 used) Page 32 www.sauder.com 423527...

  • Página 33: Drawer Bottom

    SMALL DRAWER SIDES (X and Y) and SMALL DRAWER SIDES (X and Y). Tighten two HIDDEN CAMS. å DRAWER BACK (T). Fasten a KNOB SET (10) to the SMALL DRAWER FRONT (V). Use a BLACK 1" MACHINE SCREW (25). 423527 www.sauder.com Page 33...

  • Página 34: Black 1/2" Machine Screw

    Slide the DRAWER BOTTOM (W) into the grooves in the SIDES (BB and CC). Tighten four HIDDEN CAMS. å DRAWER SIDES (BB and CC) and DRAWER BACK (DD). Fasten a KNOB SET (10) to the DRAWER FRONT (AA). Use a BLACK 1/2" MACHINE SCREW (30). Page 34 www.sauder.com 423527...

  • Página 35: Drawer Back

    DRAWER SIDES (FF and GG). Tighten four HIDDEN CAMS. LARGE DRAWER SIDES (FF and GG) and SMALL å Fasten a KNOB SET (10) to the LARGE DRAWER DRAWER BACK (HH). FRONT (EE). Use a BLACK 1/2" MACHINE SCREW (30). 423527 www.sauder.com Page 35...
  • Página 36 Step Step 31 å Place four FILE BAR CLIPS (12) and two FILE BARS (21) onto the top edge of the plastic file glides on the LARGE DRAWER SIDES (FF and GG). (4 used) (2 used) Page 36 www.sauder.com 423527...
  • Página 37 SCREWS (26). Use the exact holes shown. help a friend, don't leave without a bite. Open end Open end BLACK 5/8" FLAT HEAD SCREW (6 used in this step) This hole must be closer to this edge. Open end 423527 www.sauder.com Page 37...
  • Página 38 This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. And to celebrate, why not share your success story? To cover HIDDEN CAMS and SCREWS (7 used) ADJUSTABLE SHELF 25 LBS. BOTTOM 40 LBS. Page 38 www.sauder.com 423527...

  • Página 39: Liste De Pièces

    GRAND DESSUS ..............1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) pour future référence. PETIT DESSUS ................1 GLISSIÈRE D'EXTENSION ..........6 Pour contacter Sauder EXTRÉMITÉ GAUCHE ............1 COULISSE D'EXTENSION ..........6 en ce qui concerne cet MONTANT GAUCHE ............1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) élément, faire référence...
  • Página 40 Retourner le PIED ARRIÈRE GAUCHE (M). Faire tourner trois VIS REMARQUE : S'assurer de bien insérer les CHEVILLES EN D'EXCENTRIQUE (5) dans le PIED ARRIÈRE GAUCHE (M). BOIS situées sur l'ARRIÈRE et l’ENTRETOISE dans les trous sur l'EXTRÉMITÉ GAUCHE. Page 40 www.sauder.com 423527...
  • Página 41 Fixer l'ENSEMBLE DE BOUTONS (10) à la PORTE (U). Utiliser une REMARQUE : S'assurer de bien insérer les GRANDES CHEVILLES VIS À MÉTAUX 25 mm NOIRE (25). EN BOIS situées sur les VOILES DE FOND dans les trous des MONTANTS. 423527 www.sauder.com Page 41...
  • Página 42 REMARQUE : Les COULISSES D'EXTENSION LARGES seront utilisées ultérieurement pour la TABLETTE DE CLAVIER. Insérer quatre GRANDES CHEVILLES EN BOIS (6) dans les bords longs des MONTANTS DE TABLETTE DE CLAVIER (R et S). Page 42 www.sauder.com 423527...
  • Página 43 4. Fixer le DEVANT DE GRAND TIROIR (EE) aux CÔTÉS DE GRAND TIROIR (FF et GG). Serrer quatre EXCENTRIQUES ESCAMOTABLES. Fixer un ENSEMBLE DE BOUTONS (10) sur le DEVANT DE GRAND TIROIR (EE). Utiliser une VIS À MÉTAUX 12,7 mm NOIRE (30). 423527 www.sauder.com Page 43...

  • Página 44: Lista De Partes

    CORREDERA DE EXTENSIÓN ........6 EXTREMO IZQUIERDO ............1 necesita ponerse en (JUEGO DE EXTENSIÓN SE MUESTRA POR SEPARADO) contacto con Sauder en PARAL IZQUIERDO ..............1 RIEL DE EXTENSIÓN ANCHO ........2 cuanto a esta unidad, PARAL DERECHO ..............1 CORREDERA DE EXTENSIÓN ANCHA ....
  • Página 45 EXCÉNTRICO (5) dentro de la PATA IZQUIERDA POSTERIOR (M). Apriete tres EXCÉNTRICOS ESCONDIDOS. NOTA: Asegúrese de que los PASADORES DE MADERA sujetados al DORSO y a la RIOSTRA se inserten dentro de los agujeros del EXTREMO IZQUIERDO. 423527 www.sauder.com Page 45...
  • Página 46 VELOS DE FONDO se inserten dentro de los agujeros NEGROS DE CABEZA PERDIDA de 16 mm (26). de los PARALES. Fije un JUEGO DE PERILLAS (10) a la PUERTA (U). Utilice un TORNILLO NEGRO PARA METAL de 25 mm (25). Page 46 www.sauder.com 423527...
  • Página 47 NOTA: Las CORREDERAS DE EXTENSIÓN ANCHAS se utilizarán más tarde para el ESTANTE DE TECLADO. Inserte cuatro PASADORES DE MADERA GRANDES (6) en los bordes largos de los PARALES DE ESTANTE DE TECLADO (R y S). 423527 www.sauder.com Page 47...
  • Página 48 4. Fije la CARA DE CAJÓN GRANDE (EE) a los LADOS DE CAJÓN GRANDE (FF y GG). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. Fije un JUEGO DE PERILLAS (10) a la CARA DE CAJÓN GRANDE (EE). Utilice un TORNILLO NEGRO PARA METAL de 12,7 mm (30). Page 48 www.sauder.com 423527...
  • Página 49 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 423527 www.sauder.com Page 49...
  • Página 50 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 50 www.sauder.com 423527...

  • Página 51: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 52 So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.

Tabla de contenido