Operation Video Entry System - Fermax HALO & iLOFT Manual

Idiomas disponibles

Kit Halo & iLoft

OPERATION - Video Entry System

NOTE:

If there is more than one iLoft monitor in the system and a call is made to a

monitor, the rest of the monitors will show a blue led warning that the channel is busy.

All manuals and user guides at all-guides.com

Answering a call

When the call button on the Street Panel is pressed a call tone is emitted

both at the panel and on the monitor, and the screen goes on.

Press the button

the street and the home will be opened; operation is in hands-free mode.

The communication will automatically end after 90 seconds, or at any

time by pressing the button

conversation lasts.

If communication is not established with the street panel, the monitor will

automatically go off after 30 seconds.

Opening the door

When a call is received from the street panel, it is possible to open

the door at any time, by pressing the button

Manual Activation of the Monitor (Auto-start)

With the monitor on standby, press this button

the monitor on manually. To sequentially select between the main camera

and the secondary camera (if there is one), hold the button

To activate the audio and speak to the visitor or open the door, carry out the

steps described above.

If communication is not established with the street panel, the monitor will

automatically go off after 30 seconds.

to speak with the visitor. The audio channel between

. The LED will remain on (blue) while the

for 1 second to switch

for 2 seconds.

Pag 35

Tabla de Contenido

Capítulos