Fermax Halo Manual De Instrucciones página 62

Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft Kit Halo & iLoft
Enter Programming mode
You may enter Programming
- By Code:
1. Press the keys marked with a dot (except the bell key) sequentially from left to
right. The first key once, the second twice, the third 3 times and the fourth 4
times. If entered correctly, a long tone confirmation will be heard at the final
press, except in the first.
Key 1-> press once
Key 3-> press 3 times
2. After this operation, the panel asks for a code.
Administrator (Installer) Code
User Programming Code
May be modified, please see corresponding chapter (option: 3.Codes) .
(1)
Use the
the code and confirm each digit with the confirmation key
.
- By Master Card
27 ºC
To call press
Show Master Card
Pag 22
by code
by master card
(programmed previously)
+ +
Beep beep beep beep
(1)
: 19025
- keys to enter the digits corresponding to
(programmed previously, see corresponding chapter, option: 3.3 Prox. Master)
10:54
Beep beep beep
Key 2-> press twice
+
Beep beep beep beep
Key 4-> press 4 times
(1)
: 24797
(allows access to all menu options).
(lets you Add and Delete user cards).
27 ºC
1.Users
2.Configuration
3.Codes
4.Timing
5.Message
6.Utilities
Programming Menu
27 ºC
To call press
+ + +
Beep beep beep beep
27 ºC
Programmer code:
_ _ _ _ _
10:54
10:54
10:54