Warnings; Setup Requirements - Angelcare AC117 Manual De Usuario

SETUP REQUIREMENTS

INCLUDED:
Parent Unit
2X
2 Rechargeable
AAA Batteries
(for Parent Unit)
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm (1/4")
Minimum dimensions:
33 x 33 cm (13" x 13")
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than
the Sensor Pad surface.
STEP 1 - CHARGING THE PARENT UNIT (10 HOURS)
1
4
Nursery Unit
CR3032 battery
(for Sensor Pad) (for Parent Unit)
Hardboard
Battery
compartment
2
Tabletop stand
(for Nursery Unit)
AC adapter
(for Nursery Unit)
WHAT YOU WILL NEED (NOT INCLUDED):
2X
2 AAA Alkaline
Batteries
(for Nursery Unit)
10
3
Model AC115
Baby Breathing Monitor
with Sound
Wireless Movement Sensor Pad
* Always place Angelcare
Flat micro USB cable
AC adapter
(for Nursery Unit adapter)
Miniature Philips
Screwdriver
1) Remove the battery compartment
on the rear. Insert the provided
rechargeable batteries into the
compartment.
2) Connect the USB plug to the
Parent Unit and connect the
power adapter with an electrical
outlet.
3) Charge the unit for
10 continuous hours prior
to first use.
logo side up *
®