Turning On Your Monitor - Angelcare AC117 Manual De Usuario

STEP 4 - TURNING ON YOUR MONITOR
YOU ARE NOW READY TO USE YOUR MONITOR
The Angelcare monitor can be used with the pre-program factory settings or you can also customize
®
your settings to your preference.
DEFAULT SETTINGS
Detection Mode:
Movement:
Sound:
Sound transmission (VOX):
TIC Function:
VOX Sensitivity:
Temperature Unit:
Temperature Alarm:
Temperature Alarm Setting:
TURN ON YOUR MONITOR
Press ON/OFF
on the Parent Unit
for 2 seconds.
8
Press ON/OFF
on the Nursery Unit
for 2 seconds.
When Parent Unit is turned ON and Nursery Unit is OFF or if there is a lost
connection between the 2 units:
- The Out-of-Range icon on the Parent Unit will blink
- The Parent Unit will beep 3 times every 15 seconds
ON
ON
OFF
OFF
Level 2 (of 4)
Fahrenheit (United States)
Celsius (Canada)
OFF
High: 86.2˚F (30˚C)
Low: 66.2˚F (19˚C)
NOTE:
The screen of the Parent Unit flashes the out-of-
range icon until it displays the room temperature
and function icons. The connection process
should be complete within 30 seconds. If this
sequence is not completed within 30 seconds
you will need to switch the units off and repeat.