Description Of The Appliance And Accessories; Preparations; Use - Imetec ZEROCALC PRO 2200 Instrucciones Para El Uso

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer the illustrative guide on page I to check your appliance's equipment.
1. Plate temperature LED
2. Temperature adjustment knob
3. Spray button
4. Super-steam button
5. Steam selector
6. Water fill-up opening
7. Spray
Sort the laundry according to the international symbols shown on the label; if this is missing,
sort according to the type of material.
Start to iron the garments that require a lower temperature so as to reduce idle time (the iron
requires less time to warm up than to cool down) and eliminate the risk of burning the fabric.
ATTENTION! The iron must not be used if it has been
dropped, if there is visible damage or if it leaks water.
WARNING: TYPE OF WATER TO BE USED
Use only:
• unscented demineralised water for irons.
ATTENTION! Do not add to the reservoir chemical diluting
agents, scented liquids or descaling agents as these
substances may damage the product.
ATTENTION! Do not use water from dryers, air-conditioners,
tumble dryers, filtered water with softeners and rain water.
The reservoir may already contain some water as each product is tested before being placed
on the market.
Verify that the plug (13) is disconnected from the socket.
Set the steam selector (5) to 0 [Fig. B].
8. Calc clean button
9. Max fill-up level
10. Plate with steam holes
11. Water reservoir
12. Technical data
13. Plug
14. Water cup
PREPARATION

USE

Max
13
EN