(ALC)
BLC
LEVEL
RET
For items in the BLC menu, the user can set the area and location of the BLC area by pressing
ENTER key after put the cursor on [USER...] using the Left, Right key. For AREA items, you
can use the Up, Down, Left, Right key to designate the AREA, and then press the ENTER key.
You can set the location for areas using the Up, Down, Left, Right key in the [LOCATION].
(ALC)
BLC
LEVEL
RET
BOTTOM...
( 0) -- -- I - - - -
USER...
( 0) -- -- I - - - -
(BLC)
<SIZE>
<LOCATION>...
RET