Wall Mounting - Sanus VuePoint F180 Manual Del Usuario

2
CAUTION:

Wall Mounting

Wood Stud Mounting
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
 Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
 DO NOT over-tighten the lag bolts [06].
 Any material covering the wall must not exceed 16 mm (5/8 in.).
 Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.)
12
6902-002012 <01>