Publicidad
EN
DE
FR
DE ES
FR EN
ES
speCifiCations
Model
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Measuered sound
pressure level
Guaranteed sound power
level
Vibration level
Weight with battery pack
DesCription
1.
Blade cover
2.
Blade
3.
Guard
4.
Micro Switch
5.
Front handle
6.
Rotate release
7.
Trigger Switch
8.
On/off power button
9.
Anti-jamming button
operation
For complete charging instructions, refer to the Operator's
Manuals for your battery pack and charger models.
note: To avoid serious personal injury, always remove the
battery pack and keep hands clear of the lock-out button
when carrying or transporting the tool.
install BatterY paCK
„ Place the battery pack in the hedge trimmer. Align
raised rib on battery pack with groove in hedge
trimmer. See figure 2.
„ Make sure the latch on the battery pack snaps in place
and that battery pack is secured in hedge trimmer
before beginning operation.
IT
PT
NL
SV DA NO
IT
PT
NL
SV DA NO
English (Original instructions)
2200607
80 volts
3400 (±10%) SPM
3400 (±10%) SPM
26" (66cm)
33mm
83 dB (A)
96 dB (A)
Ah: 3.5m/s 2 , k:1.5m/s 2
5.5kg
FI
HU CS RU RO PL
FI
HU CS RU RO PL
reMove BatterY paCK
„ Locate the latch on the battery pack and depress to
release the battery pack from the hedge trimmer. See
Figure 2.
„ Remove battery pack from the hedge trimmer.
When placing battery pack in your hedge trimmer,
be sure raised rib on battery pack aligns with groove
in hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause damage
to internal components.
startinG tHe HeDGe triMMer See figure 3
„ Remove the blade cover.
„ Push the power button (I/O) to turn the unit on.
„ For added safety, there is a micro switch (4) in the front
handle. When operating, hold the trimmer with both
hands, one hand to squeeze the micro switch, and the
other hand to squeeze the trigger switch (7).
stoppinG tHe HeDGe triMMer
„ Release the micro switch and trigger to stop the hedge
trimmer.
„ Press the power button to turn off the hedge trimmer.
„ Remove battery pack from the hedge trimmer.
usinG tHe rotatinG rear HanDle See figure 4.
„ Place the hedge trimmer on a flat and even surface.
„ Make sure that you released the trigger.
„ Pull the rotation lever (6) and begin turning the rear
handle. Release the rotation lever and turn the handle
90 degrees to either side until it clicks into place and
the lever locks in.
„ To turn the handle back to center, pull the rotation lever
again, turn the handle slightly, release the rotation lever
and continue turning the handle until it locks into place.
anti-JaMMinG funCtion
If the branch is blocked in the blade, press the anti-
jamming button on the control panel, the blade will reverse
twice, and the branch should be released.
operatinG tips
„ Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
„ Do not try to cut stems or twigs that are larger than 15
15
SL HR ET
LT
LV SK BG
SL HR ET
LT
LV SK BG
Caution
Publicidad
