Temperature; Projector; Backlight; Reset - Oregon Scientific RM939PA Manual De Usuario

To change soothing sound:
1. Press and hold SOUND / SLEEP for 2 seconds while
the soothing sound is on.
2. Press or to change the soothing sound.
3. Press SOUND / SLEEP to confirm.

TEMPERATURE

To select indoor temperature unit press °C / °F.

PROJECTOR

Press SNOOZE / LIGHT to project the time and alarm
for 5 seconds.
To use the projector continuously, you MUST plug in the
adapter and slide the PROJECTION switch to ON.
You can also:
• Adjust the FOCUS knob to make the image clearer.
• Adjust the IMAGE ROTATION knob to rotate the
image clockwise or counter-clockwise.
• Manually tilt the projection unit to position the image
or press 180° ROTATION to reverse the image and
turn it upside down.

BACKLIGHT

Press SNOOZE / LIGHT to activate the backlight for 5
seconds.

RESET

To return the unit to the default settings, insert a thin blunt
object into the RESET hole.
MOTION SENSOR – MSR939 / MSR939A
(OPTIONAL)
This product can support up to two motion sensors. To
enable the motion alarm you must purchase this device
separately.
Please refer to the motion sensor (MSR939 /
MSR939A) user manual for further information.

MOTION ALARM DISPLAY

ICON MEANING
Motion sensor alarm icon
Code icons

MOTION ALARM

To set the motion alarm:
1. Press and hold MOTION ALARM for 2 seconds.
2. Use and to select a code setting that matches
the CODE switch on the rear of the sensor.
3. Press MOTION ALARM to confirm.
4. Press or to select the motion sensor start time.
6