Timer; Temperature Display; Alti-Baro Mode - Oregon Scientific OUTBREAKER RX109 Serie Manual De Usuario

The Timer works in CLOCK, ALTI-BARO,
CARDIO, and BIKE modes. From any of
these Modes, press SELECT/+ to display
the stopwatch. Press FUNC/SET to reset
the Stopwatch, then:
• Press and hold FUNC/SET for 2 seconds.
The display will change to TMR.
• Press ST/SP/- or SELECT/+ to change a value.
• Press FUNC/SET to switch between values and accept
changes.
• Press ST/SP/- to start or stop the timer.
• With the timer stopped, press and hold FUNC/SET to reset.
NOTE You can switch to other Modes while running the timer
in the background.
NOTE To return to STW Mode, you must reset all the timer
values to 0. The timer automatically switches to STW Mode
when it reaches 0.
RX109-English.P65
All manuals and user guides at all-guides.com

TIMER

10

TEMPERATURE DISPLAY

The Temperature can be displayed in CLOCK,
ALTI-BARO, CARDIO, and BIKE Modes. From
any of these Modes, press SELECT/+ to display
the Temperature. The Temperature shows in
either Celsius or Fahrenheit, depending on the
measurement unit you select when setting the
CLOCK (see CLOCK Mode).
Your wrist temperature may affect the reading, particu-
NOTE
larly during exercise. Take off the watch and leave it for 15
minutes to get the most accurate reading.

ALTI-BARO MODE

The OUTBREAKER sports watch includes a
barometer that distinguishes between pressure
caused by altitude changes and pressure
caused by weather conditions. This technology
reduces discrepancies in readings and makes
the altimeter more accurate than most average
devices.
The watch can store and recall the following values:
• Current altitude (updated every 2 seconds)
• Maximum / minimum altitudes attained during your a trip
• Total accumulated maximum / minimum altitudes attained
during your trip
10
2004.9.2, 3:08 PM