Safety Instructions - AL-KO GtLi 18V Manual De Instrucciones

Technical data
Mechanical safety acc. to EN 786, 5.1.1, Annex
E and D,
sound pressure and sound energy level acc. to
DIN EN ISO 3744:2010
Measurement of mechanical vibration at the hand
grip acc. to EN 28662-1:1992
The specified values have been establis-
hed based on a standardised test pro-
cess and can be used for comparing dif-
ferent electrical tools with one another.
In addition, these values are suitable for
estimating in advance the loads to which
the user is exposed due to vibration.
WARNING!
The actual vibration values may differ
from those specified, depending on what
the electrical tool is used for.
Take measures to protect yourself
against vibration loads. In doing so, take
account of the entire working process,
i.e. also times during which the electrical
tool is operating without load, or is swit-
ched off.
Suitable measures include regular main-
tenance and care of the electrical tool
and the tool attachments, keeping your
hands warm, taking regular breaks and
planning the working sequences effec-
tively.

SAFETY INSTRUCTIONS

CAUTION!
The cutting tools continue to rotate even
after the motor has been switched off.
Wear suitable clothing, eye protection and gl-
oves
WARNING!
Wear ear defenders to prevent impair-
ment of hearing.
Never allow children or uninstructed persons
to operate or maintain the machine. Local re-
gulations may specify the minimum age of
people operating the machine
Stop using the machine when people, es-
pecially children (and also pets) are in the
vicinity.
Only mow during daylight hours or with good
artificial lighting.
440084_c
Before taking the machine into operation, and
following any impact, check the machine for
signs of wear or damage and undertake the
necessary repairs.
Never use the appliance if any protective de-
vices are damaged or missing.
Always keep hand and feet away from the
cutting device, above all when switching on
the motor.
Any device that is used for cutting off the line
represents a danger of injury.
After pulling out a new line, always hold the
machine in its normal working position before
switching it on.
Never fit metallic cutting elements.
Only use genuine spare parts and genuine
accessories.
Always remove the battery
when the appliance is unsupervised
before maintenance work
before cleaning the appliance
if the appliance is not going to be used
for some time
Make sure that air openings are free from
contamination.
In spite of technical and additional protec-
tive measures, there is always a residual risk
when working with the machine.
Keep the handles dry and clean.
Remove foreign objects from the working
area.
Use the machine only in perfect working or-
der.
Always keep the guard, string head and en-
gine free of mowing debris.
Keep body and clothing away from cutting
parts.
Persons who are not familiar with the trim-
mer should practise handling it with the en-
gine switched off.
Wear appropriate working clothes.
Always ensure stability when working.
Always operate the appliance with two hands.
Keep others away from dangerous areas.
Do not leave the appliance unsupervised.
When mowing on sloping ground, always
stand downhill of the cutting device.
15