Child lock
You can use the child lock to prevent children from adjusting
the cooktop.
Note: If a cooking position is switched on, the child lock is not
available.
Switching the child lock on and off
The hob must be switched on. No hotplates must have been
set.
Short-term timer
With the short-term timer, you can set a cooking time of up to
9 hours, 59 minutes and 59 seconds. It runs independently of
the cooktop.
This function does not automatically switch off a hotplate.
Setting the cooking time
Touch the
symbol. 0
S
1.
h
In the next 10 seconds, slide your finger up or down and set
2.
the desired cooking time in minutes.
Options menu
Your appliance has various presettings. You can adapt these
presettings to your own needs.
Setting
Display Brightness
Display Calibration
Clock
Time format
Signal tone
appears in the display.
00
00
min
sec
Description / Options
You can change the brightness of the display.
Brightness (medium*)
You can optimise the display's responsiveness to touch.
You can set the clock.
You can choose a time format.
12 h
■
24 h
■
You can switch the signal tones of the appliance on and off.
Signal tones on*
■
Operation error signal tone on
■
Signal tones off
■
To switch on: Touch the
ó
lock" display area. The hob is locked.
To switch off: Touch the
‚
display area. The hob is unlocked.
Note: There are different settings available for the child lock
(automatic, manual, off). To find out how to change the settings,
see section Options menu.
Select hours and seconds. Slide your finger up or down and
3.
set the desired cooking time.
After three seconds, the set cooking time is applied and
starts counting down in the display.
When the cooking time has elapsed
An audible signal sounds when the cooking time has elapsed.
appears in the display. Touch the
00.00
min
short-term timer is switched off.
To correct the cooking time: Touch the
the cooking time.
To delete the cooking time: Touch the
touch the C symbol.
Note: If a hotplate is switched on, the Options menu is not
available.
symbol and then the
‚
"child
symbol and then the "Switch off"
S
symbol. The
S
symbol and reset
symbol and then
S
27