4.1
OVERALL DIMENSIONS
The overall dimensions are shown in the figure nr. 4.1.
4.2
TECHICAL FEATURES
- Structure completely made of steel
- Gearbox with gearings in grease
- Basin, protection, tool shaft, and stainless steel tool.
- 2 speeds motor ( SP201V and SP301V only one speed)
- It can be moved by wheels and is equipped with a locking system.
- 1 timer 0.99 minutes – on request for models SP40 and SP50
- 2 timer 0.99 minutes – on request for models SP40 and SP50
4.3
FEATURES OF THE ELECTRICAL MOTOR
Three-phase asynchronous motor.
Technical data:
Power ............... 0.9/1.3 kW
-
Power ............... 1.1 kW
-
Power ............... 1.5 kW
-
Power ............... 1,5/2,2 kW
-
Speed ............... 950/1400 rev./min.
-
Frequency ........... 50 Hertz
-
Voltage ............. 400
-
Three-phase
-
four/six poles
-
Protection IP 44
-
4.4
FEATURES OF THE ELECTRICAL SYSTEM
The electrical system has been built according to the regulations in force
and particularly according to the safety standard EN 60204-1 concerning the
electrical equipment on machineries.
- Earthing system
- Protection device against overcurrent :
- thermal cutout
- fuses to protect the primary and the secondary of the transformer
4TH CHAPTER
TECHNICAL DATA
x SP20 / SP30
x SP201V
x SP301V
x SP40 and SP50
6