9.2
OTHER DANGERS
1) Spiral-shaped tool.
During all their working cycle inside the basin, the spiral-shaped tool is
completely protected by a front grating, which can be lifted.
2) Gearbox elements.
The gearbox elements, all potentially dangerous, are protected by fixed
protection for which the instructions contained in this handbook are to be
followed.
3) Electrical dangers.
The electrical system has been made according to the safety standards for
installations in machineries.
In any case, the instructions contained in this handbook, as well as all the
normal precautions to follow when using live equipment, are to be followed.
ANY OPERATION, IN WHICH LIVE PARTS AND ELECTRICAL ELEMENTS ARE TO BE
REACHED, MUST BE CARRIED OUT ONLY BY A SKILLED STAFF AND, HOWEVER, THE
FOLLOWING PROCEDURE IS TO BE OBSERVED:
A) Turn off the machine
B) Turn off the power by the main switch (see chapter on running)
C) Remove the plug from the socket
D) Carry out the necessary operations
E) Connect again the plug with the socket
4) Dangers caused by toxic materials.
Since the materials in contact with food comply with the regulations in
force on the matter, they must not be considered toxic.
19