(For VXL1-8) Insert the port block into the bass reflex
port, and then align the port cover and fasten it in
place using the screws that you removed.
NOTE
Insert the port block so that it fits into the port.
0.8 N·m
5
Put the grille back on the speaker.
When doing this, align the edges of the speaker with the position of the
grille to fit the grille in place.
6
Fasten the top and bottom panels in place using
the screws that you removed.
NOTE
Take appropriate measures to waterproof the openings below the ter-
minal covers.
0.8 N·m
VXL1B-24/VXL1W-24/VXL1B-16/VXL1W-16/VXL1B-8/VXL1W-8 Installation Guide
Installing the port cover
11