Optimising Radio Reception; Configuring The Display - Blaupunkt John Deere MP36 Instrucciones De Manejo

Radio mode
Selecting the PTY language
You can select the language for the display
of the programme types. Options include
DEUTSCH, ENGLISH and FRANÇAIS.

Press the MENU button 9.

Press the or button : repeat-
edly until "PTY LANG" appears on the
display.

Set the desired language with the or
button :.
When you have finished making your chang-
es,

press the MENU button twice 9.
Selecting a programme type and
starting seek tuning

Press the or button :.
The current programme type appears on
the display.

If you want to select another pro-
gramme type, you can do so by press-
ing the or button : while this dis-
play is visible.
Or

Press one of the buttons 1 - 6 ; to se-
lect a programme type that is assigned
to one of these buttons.
The selected programme type appears
briefly on the display.

Press the or button : to start
seek tuning.
The radio will then tune into the next station
that it finds that corresponds to your select-
ed programme type.

Assigning a programme type to a station
button

Select a programme type using the or
button :.

Press and hold the desired station but-
ton 1 - 6 ; for longer than two sec-
onds.
The programme type is stored on the se-
lected button 1 - 6 ;.

Optimising radio reception

Treble reduction feature during
interference (High Cut)
The High Cut function results in an improved
reception in case of weak radio reception
(FM only). If reception interferences are
present, the interference level is automati-
cally reduced.
Switching High Cut on/off

Press the MENU button 9.
 Press the or button : repeatedly
until "HICUT" appears on the display.
 Press the or button : to switch
High Cut on (1) or off (0).
"HICUT 0" means no automatic reduction of
the interference level, "HICUT 1" means au-
tomatic reduction of the interference level.

Press the MENU button 9.

Configuring the display

In radio mode, you have the option of dis-
playing the waveband with memory bank
and the time or station name or frequency
of the current station.

To switch the display, press and hold
down the DISPL
er than two seconds.
button 8 for long-