Esp; Рус; Maintenance; Electric Faults Of The Motor And Of The Protection System - Vitella SPA SA Serie Manual De Instrucciones

The replacement of the mechanical parts must absolutely be carried out by skilled per-
sonnel.
If the machine is under guarantee, the Manufacturer must be notified immediately.
Operations that must be performed only by qualified personnel.

ELECTRIC FAULTS OF THE MOTOR AND OF THE PROTECTION SYSTEM

Ask for the intervention of an electrician or contact the Manufacturer
The machine structure is made of sheet steel painted with epoxy powder paint or two-
component paint. The blades are made of AISI 304 stainless steel. The supports, gears
and reduction gears are made of cast iron. When the machine is to be scrapped it must
be dismantled, separating the parts according to the different materials and consigning
them to authorised facilities for disposal.
SPA SA

MAINTENANCE

TIGHTENING THE BELT
Remove the rear case of the machine, unscrewing
the fixing screws. The belt is regulated by turning the
screw shown in the figure at the side; use a spanner to
tighten it. After completing regulation, secure the rear
case again.

SCRAPPING THE MACHINE

ITA
ENG
FRA

ESP

РУС
29