Dexxo Pro RTS
6 - MaintenanCe
6.1 replacing the bulb in the light unit
[1]. Remove the light cover.
[2]. Unscrew and replace the defective light bulb.
[3]. Refit the light cover.
Use a 24 V 21 W BA15s socket light bulb.
6.2
Checking
The safety mechanisms (cells, pedestrian door contact, sensor
bar)
Check correct operation every six months (See section 4.2).
6.3 Battery replacement
Keytis
Keygo
6
24 V 21 W max.
7 - teCHniCal sPeCiFiCations
Basic technical
Dexxo Pro 800
specifications
Mains power supply
Power consumption on standby
Max. power consumption
600 W (with 500 W remote controlled lighting)
Traction force – Peak force
20 cycles per day with a standard rail
(tested for 36,500 cycles)
Use
50 cycles per day with a high performance
rail (tested for 90,000 cycles)
Number of channels that can be
memorised
Radio frequency
Integrated light
Remote controlled lighting
Operating temperature
Dexxo Pro 1000
230 V - 50 Hz
5 W
800 N
1000 N
32
433,42 MHz
< 10 mW
24 V / 21 W max. BA15s socket
230 V / 500 W max. Class 2
Halogen or incandescent only
-20 °C / +60 °C
Copyright © 2015 Somfy SAS. All rights reserved