Peripherals; Maintenance; Replacing The Bulb In The Light Unit - SOMFY Dexxo Pro 800 RTS Manual De Utilización

Ocultar thumbs Ver también para Dexxo Pro 800 RTS:
Tabla de contenido

Publicidad

PERIPHERALS

A number of peripherals are available.
Key
Description
1
Keytis 2NS RTS remote control
2
Keytis 4NS RTS remote control
3
Keygo remote control
4
RTS pushbutton
5
RTS radio code keypad
6
Photoelectric cells
7
Orange light
8
Keyswitch
9
Battery
10
Release lock
11
Outside release lock
12
Door locking kit

MAINTENANCE

Replacing the bulb in the light unit (Fig. 14)
[1] [2]. Remove the light cover.
[3] [4]. Unscrew and replace the defective light bulb.
[5] [6] [7].
Use a 24 V 21 W BA15s socket light bulb.
6
13
Comments
Hand held 2 channel remote control.
Hand held 4 channel remote control.
Four channel keyring remote control.
Wall mounted 2 channel remote control switch.
Access code control point. For use outside the garage.
To prevent door closure if an obstacle is detected.
To signal a warning when the door operates.
Keyswitch for secure control.
To provide continued operation during a power cut.
To engage the manual release system from the outside using the existing door handle.
Highly recommended when the garage door is the only access point into the garage.
To engage the manual release system from the outside using the existing door handle.
Highly recommended when the garage door is the only access point into the garage.
A system to reinforce door locking.
14
24 V 21 W max.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dexxo pro 1000 rts

Tabla de contenido