Fein MSfo870-1d Instrucciones De Uso página 21

OBJ_BUCH-0000000342-001.book Page 21 Wednesday, March 6, 2019 3:14 PM
Adjustments.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Adjusting the wheel guard (figure 9).
Loosen the clamping screw.
Turn the wheel guard to the requested work-
ing position, then clamp the wheel guard with
the clamping screw.
Fig. 9
Wheel guard
Clamping screw
en
21