Switching Off - Stihl MSA 160 T Manual De Instrucciones

English
NOTICE
Always slacken off the chain after
finishing work. The chain contracts as it
cools down. If it is not slackened off, it
can damage the drive shaft and
bearings.
Long-term storage
See "Storing the machine"
64

Switching Off

1
2
Release the trigger switch
N
lockout (1) and trigger switch (2) so
that they return to their initial
position – in the initial position, the
trigger switch (2) is once again
blocked by the trigger switch
lockout (1)
The coasting brake stops the saw chain.
Secure the chain saw so that it
N
cannot be accidentally switched on
again – press the hand guard
forward towards the tip of the bar
(position ƒ)
During breaks and after work, remove
the battery from the machine and fit the
chain scabbard.
Removing the battery
Press both trigger interlocks (3)
N
simultaneously – battery (4) is
unlocked
Remove battery (4) from the
N
housing
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
4
3
MSA 160 T