Light Replacement - Kohler K-2431 Guia Del Usuario

Light Replacement

WARNING: Risk of electric shock. Turn the electricity off at the circuit breaker or fuse box before
replacing the lights on this product. When unplugged, the electrical components will no longer be
powered, which will eliminate the risk of electric shock.
CAUTION: Risk of personal injury or product damage. Use care to avoid mirror damage when
performing these steps.
Drawer Light Replacement
Turn the electricity off at the circuit breaker or fuse box.
Open the drawer, then remove the light cover. Set the light cover aside.
Remove the existing bulb from the ballast.
WARNING: Risk of fire. A 21" (53.3 cm) T5 bulb rated at 13 watts is required to replace the drawer
light. To avoid risk of fire, do not use any other type of bulb for replacement.
Install the new 13 W, 21" (53.3 cm) T5 bulb into the ballast.
Reinstall the light cover, then close the drawer.
Repeat this procedure for the remaining bulb.
Turn the electricity on at the circuit breaker or fuse box.
LED Light Replacement
Turn the electricity off at the circuit breaker or fuse box.
Turn the existing LED light counterclockwise to remove it from the nut.
WARNING: Risk of fire. Only use LED lights rated at 5 watts.
Insert the new LED light into the nut, then turn the LED light clockwise to secure it into place.
Repeat this procedure for the remaining LED light.
Turn the electricity on at the circuit breaker or fuse box.
1059686-5-D
Light Cover
Nut
Ballast
Bulb
Bottom View
LED Light
6 Kohler Co.