Safety Instructions - Harman JBL PROFESSIONAL MAX Serie Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The JBL MAX product line covered by this manual is not intended for use in high humidity environments. High humidity
levels can damage parts of the transducers, in addition to causing the metal parts and electrical contacts in the circuits
to oxidize. Avoid exposing the speakers to direct moisture and do not use them in environments where the surfaces are
condensing.
Keep the powered speakers out of direct, prolonged, or intense sunlight. Internal parts of the product can be damaged
due to high temperatures generated by sunlight, and product surfaces can be degraded by prolonged exposure to intense
ultraviolet (UV) light.
Products in the JBL MAX line can generate considerable sound pressure levels. When placed on a slippery surface, the
powered speaker may move due to its operation at high volume. Precautions must be taken to ensure that the powered
speaker does not fall from the surface on which it is placed.
HEARING DAMAGE, PROLONGED EXPOSURE TO EXCESSIVE SOUND PRESSURE LEVELS
Products in the JBL MAX line are capable of generating sound pressure levels (dB SPL) sufficient to cause permanent hearing damage to artists,
production staff, and audiences. Precautions must be taken to avoid prolonged exposure to sound pressure levels above 85 dB SPL.
MAINTENANCE AND CLEANING
THESE EQUIPMENTS CONTAIN POTENTIALLY LETHAL VOLTAGES. TO AVOID THE HAZARD OF ELECTRIC SHOCK, DO NOT REMOVE THE CHASSIS,
AMPLIFIER MODULE OR AC INPUT COVERS. THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE PRODUCT. TECHNICAL ASSISTANCE
PROCEDURES MUST BE CHARGED BY DULY QUALIFIED PERSONNEL BY THE MANUFACTURER.
Products can be cleaned with a dry cloth. Do not allow moisture to enter through any openings in the system. Make sure the system is
unplugged from the AC outlet before cleaning.
RoHS COMPLIANCE
This product complies with Directive 2011/65/EU and (EU) 2015/863 of the European Parliament and of the Council of 19.
03/31/2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
The MAX 10, MAX 12 and MAX 15 models are equipped with the MAXBT Bluetooth module - Bluetooth 5.0 BLE (GFSK/1 MBps), BTH EDR
This equipment is not entitled to protection against harmful interference and may not cause interference in properly authorized systems.

SAFETY INSTRUCTIONS

(GFSK/8DPSK).
09926-21-10879
3

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido