All manuals and user guides at all-guides.com
OBJ_DOKU-192003-004.fm Seite 16 Donnerstag, 22. November 2018 9:40 09
IMPORTANT!
Please read all information carefully.
These notes on use do not replace the user manual of the elec-
trosurgical unit (ESU) used! Read the user manual of the elec-
trosurgical unit and ask Erbe or your distributor in case of doubt!
Caution! Federal law (USA) restricts this device to sale by or on
the order of a physician!
1
Intended Use
The footswitches can be used to manually activate or deactivate
the Erbe units intended for this purpose.
2
Normal Use
No. 20711-009: One pedal footswitch, IP X8
tended for connecting to/activation by pedal an ERBOKRYO CA
Cryosurgical System.
No. 20187-003: Two pedal footswitch, IP X8
tended for connecting to/activation by pedal ICC 50, ICC 80, and
ICC Bipolar Electrosurgical Generators.
No. 20188-007: One bipolar pedal footswitch, 4 pin, AP
1)
IP X8
equipment intended for connecting to/activation by
pedal ICC 50, ICC 80, and ICC Bipolar Electrosurgical Generators.
No. 20188-013: One bipolar pedal footswitch, 7 pin, AP
1)
IP X8
equipment intended for connecting to/activation by
pedal ICC 300 and 350 Electrosurgical Generators.
1.) Equipment Standard per IEC 60529 (i.e., Protection equipment stan-
dard per the effects of continuous immersion in water).
2.) Category AP Equipment Standard per IEC 60529 and UL 2601-1
Sections 6 (i.e., Protection equipment standard per hazards of igni-
tion of flammable anaesthetic mixtures).
1)
equipment in-
1)
equipment in-
2)
and
2)
and
16