Erbe 20186-007 Indicaciones De Uso página 17

Interrupter de pedal
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
All manuals and user guides at all-guides.com
OBJ_DOKU-192003-004.fm Seite 17 Donnerstag, 22. November 2018 9:40 09
No.s 20188-015 and 20189-027: Two pedal footswitches,
1)
2)
AP
and IP X8
equipment (No. 20189-027 has a spacer) in-
tended for connecting to/activation by pedal ERBOTOM ACC and
ICC series Electrosurgical Generators as well as an APC 300 Ar-
gon Plasma Coagulator.
3
Safety instructions
WARNING!
This product may only be used by medical personnel who have
been trained per these instructions.
Before each use, check that the footswitch assembly is intact and
that the connecting cable insulation is not damaged. Verify that
there are no signs of physical damage. Check/Verify that the
footswitch functions properly.
Checks other than those described in these instructions for use
do not need to be carried out.
Protect the footswitch from any mechanical damage. Do not
throw or use excessive force! Do not kink or wrap the cable
around the pedal(s).
1)
Non-AP
Equipment Footswitches must not be used in the
presence of combustible or explosive materials.
Footswitches that have ferromagnetic parts must not be used in
or in the vicinity of a Magnetic Resonance Imaging (MRI) System.
Do not use any product that is damaged or not working properly!
Never lay this product on the patient or in his/her direct vicinity.
1.) Category AP Equipment Standard per IEC 60529 and UL 2601-1
Sections 6 (i.e., Protection equipment standard per hazards of igni-
tion of flammable anaesthetic mixtures).
2.) Equipment Standard per IEC 60529 (i.e., Protection equipment stan-
dard per the effects of continuous immersion in water).
17

Publicidad

Tabla de contenido
loading

Tabla de contenido