Cutting Off And Removing Prints - Epson SureColor S30670 Guía De Referencia Rápida

Cutting Off and Removing Prints

Make sure appears on the LCD display.
Ready
1.
Note: If you are using the Auto Take-Up Reel, set the Auto switch to OFF before using the manual switch to
position the media over the cutting groove.
Press the Media feed button and the
2.
position.
Note: If you have printed the amount of media remaining, press the
information is not cut off.
Remove the media holding plates.
3.
Cutting Off and Removing Prints
button. The printer feeds the media to the cutting
OK
u
button to rewind the media so this
|
15