Cleaning The Media System - Epson SureColor S30670 Guía De Referencia Rápida

Cleaning the Media System

To remove ink and particles of paper, clean the platen heater, pressure rollers, and media holding plates
before starting work each day.
Make sure the printer is turned off.
1.
Wait a minute, then open the front cover.
2.
Remove particles of paper and dust from the pressure rollers using a soft-bristled brush.
3.
Dampen a soft cloth in water, wring it out thoroughly, and use it to remove lint and dust from the
4.
media holding plates on both the left and right sides and from the platen.
Cleaning the Media System |
19