Epson SureColor S30670 Guía De Referencia Rápida página 34

Remove the flushing pad by grasping its tab.
6.
Caution: Hold the flushing pad upright and level as you remove it to prevent ink from spilling. Be careful not
to let ink spill onto any part of the printer.
Place the used flushing pad on a tray.
7.
Insert the two hooks on the new flushing pad into the slots as shown, and press the tab down until the
8.
pad clicks into place.
Close the right maintenance cover.
9.
Press , then press
OK
10.
Replacing the Wiper, Wiper Cleaner, and Flushing Pad
again.
OK
|
33