Troubleshooting - KitchenAid KPTT780 Instrucciones Y Recetas

TroubleshooTinG

• If the function light remains
dark and the toaster fails to
heat when the on/off switch is
turned to "on":
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
Check to see if the Toaster is plugged
in; if it is, unplug the Toaster, then
plug it back in again. A tone will
sound when the Toaster is plugged
into a live electrical outlet. If no tone
sounds, check the electrical circuit
the Toaster is connected to –
is a fuse blown or a circuit-breaker
tripped in your home? If the
problem cannot be corrected, see
the KitchenAid Warranty and Service
section on pages 13-15.*
* Do not return the Toaster to the retailer – they do not provide service.
All manuals and user guides at all-guides.com
• If you have difficulty removing
the crumb tray:
Lifting the crumb tray handle locks
the crumb tray inside the Toaster,
preventing removal. Always pull the
crumb tray straight from the Toaster
without lifting the handle.
• If the function light next to the
on/off switch flashes:
A flashing function light signals
a fault in the Toaster electronics.
Unplug the Toaster and refer to the
KitchenAid Warranty and service
section on pages 13-15*