42 8.3.2 Perform Diagnosis; Vehicle Database; 43 9.1.2 Personal Database - Bosch ACS 611 Manual Original

8.3.2 Perform diagnosis
i
The diagnosis function works only if a vehicle is
selected in the database and when two service
hoses are connected.
i
If no vehicle is selected, ACS 611 opens the
database and prompts to select a vehicle in order
to perform a diagnosis.
!
Follow the additional ACS 611 menu prompting.
1. Call up the start screen.
2. Press <MENU>.
3. Select "DIAGNOSTIC" with o u and confirm with
E.
 Message is displayed.
4. Select the number of service hoses.
i
Only 2 service hoses can be entered for diagnosis.
5. Select vehicle from the vehicle database.
6. Apply data.
7. Enter the measured ambient temperature and
confirm with E.
8. Enter the read pressure value (HP) and confirm
with E.
9. Enter the read pressure value (LP) and confirm
with E.
10. Enter the air temperature measured at the fan
openings and confirm with E.
 Option <1> and <2> are displayed:
i
<1> Result:
The entered data is displayed along with the status.
i
<2> Diagnosis:
A list of potential causes is displayed along with
the potential solutions.
11. Select option <1> or <2>.
i
Confirm with E
i
Return with <Stop>.
Robert Bosch GmbH
Operation | ACS 611 | 49 |
9. Operation
9.1 Database
<DATA BASE> key
9.1.1

Vehicle database

i
In this menu, you can select the vehicles included
in the vehicle database, along with all relevant
data.
i
The vehicle database can be updated annually
using a PS2 stick. Please contact your authorized
dealer.
i
The filling data can be taken directly from the
vehicle database and printed.
!
Follow the additional ACS 611 menu prompting.
1. Call up the start screen.
2. Press <DATABASE>.
3. Select "STANDARD SPECS" with o u and confirm
with E.
4. Select "EUROPEAN" and confirm with E.
5. Select vehicle (manufacturer) with o u and confirm
with E.
6. Select type (model) with o u and confirm with E.
7. <1>, <2> Apply data or display.
"
Vehicle is selected.
i
Return with <Stop>.
9.1.2 Personal database
i
In this menu, you can manage a personal database
with vehicles you enter yourself.
i
There are 4 lines with 20 characters for the vehicle
description, and 1 line with 20 characters each for
the refrigerant quantity, oil quantity and oil type
available.
i
Not all 4 lines need to be filled out. Navigate the
cursor to the next line with E. In this case, the
previous line will remain empty.
en
|
1 689 989 600 2020-12-01