Toshiba RAV-SM562KRT-E Manual De Instalación página 18

8
TEST RUN
In case of wired remote controller
Procedure
TEST
Keep button pushed for 4 seconds or more.
1 [TEST] is displayed on the display part and the selection of mode in the test mode is
permitted.
ON / OFF
2
Push
MODE
Using button, select the operation mode, [COOL] or [HEAT].
• Do not run the air conditioner in a mode other than [COOL] or [HEAT].
3
• The temperature controlling function does not work during test operation.
• The detection of error is performed as usual.
After the test operation, push
4
(Display part is same as procedure 1.)
TEST
Push button to cancel (release from) the test operation mode.
5 ([TEST] disappears on the display part and the status returns to a normal
stop status.)
9
TROUBLESHOOTING
Incase of wired remote controller
Confirmation and check
When a trouble occurred in the air conditioner, the
check code and the indoor unit No. appear on the
display part of the remote controller.
The check code is only displayed during the operation.
If the display disappears, operate the air conditioner
according to the following "Confirmation of error history"
for confirmation.
EN
All manuals and user guides at all-guides.com
TEMP.
TIMER SET
TIME
FILTER
RESET TEST SET CL
1, 5
button.
ON / OFF
button to stop the operation.
ON / OFF
2, 4
FAN MODE
3
SWING/FIX VENT
UNIT
Description
Check code
15
TEST
CODE No.
UNIT No.
R.C. No.
Indoor unit No. in which
an error occurred