Two-Wheel Tractors; Machine Assembly - MADER E-MT370C Manual De Instrucciones

WARNING
We advices to use the machine exclusively for the purpose it has been designed, and to follow thoroughly
the indications and the explanation given the manual.

TWO-WHEEL TRACTORS:

The two-wheel tractor has been designed to work with the rotary hoe. Operator safety and comfort are of
prime importance with in-built features such as variable hoe digging widths; adjustable handlebars; a wide
choice of work and travel speeds and safety devices designed to help prevent accidents whilst in operation.
The machine is extremely versatile and in addition to the rotary hoe for cultivating, it can also plough, form
ridges, mow and scythe grass, clear snow, etc.

MACHINE ASSEMBLY

After removing the machine from its box, open the tool kit and follow the assembly instructions detailed
below:
Wheels: towards the engine if the machine is fitted with rear-mounted implements (rotary hoe, plough, etc.)
and away from the engine is fitted with front-mounted implements (cutter bar, mower, etc.).
Carefully read the instructions related to the engine. If the engine is fitted with an oil-bath air filter, fill up to
the indicated level with correct quantity and quality.
Check that all screws and nuts are well tightened, in particular those fixing the implement to the machine.
GENERAL SAFETY
ATTENTION, DANGER!
Learn how to switch off the motor quickly!
Get acquainted with the commands and the correct us of the machine.
Get ready for working wearing resistant shoes and long trousers.
Before starting work remove all foreign matter (stones, metal wires, rods, etc.) from the area where the
equipment is to be used. Read all labels on security rules applied on the machine and follow the instructions
given before starting, operating, fill up with fuel or perform any maintenance operation on the machine.
Be safe and steady when working. Always work transversally never on slopes or descent. Pay attention when
changing the working direction. Never work on slopes deeper than 25%.
Stop the motor before checking or repairing the machine; if the machine starts vibrating in an abnormal
way perform a complete check on it.
Stop the engine before leaving the machine or to perform any adjustment on complements and before
filling it up with fuel.
40