Control Description - MADER E-MT370C Manual De Instrucciones

Arado mecánico
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Always keep the machine free from grass or grease in order to avoid any risk of fire.
FUEL IS HIGHLY FLAMMABLE
Stock the fuel in tanks dedicated to that purpose.
Always fill up the tank in open space; do not smoke during this operation.
Add the fuel when the motor is off.
Replace the exhaust pipe when worn out.
STARTING OF THE MOTOR
Disengage all command levers before starting.
Keep your feet far from the implement of the machine.
WHEN OPERATING
Always use the machine at day-light or with a strong light. Walk, never run.
FORBIDDEN, DON'T DO IT!
Avoid using the machine when people, especially children or pets, are nearly. Remember that the operator
is responsible for accidents to people or their properties.
Never permit children or not skilled person to use the machine.
Do not operate the machine barefoot or in open-toe sandals.
Never use the machine if guards or security devices are defective.
Never approach feet or hands to the moving implements of the machine.
Never rise or carry the machine in closed environments when there is fuel in the tank.
The vapours exhaled could be dangerous.
Do not modify the calibration of the motor revolutions regulator. If you make the motor turn at an excessive
speed, the risk of accidents increase.
Do not remove the tank plug nor add fuel if the motor is on or still hot.
If some fuel is spilled outside the machine, do not start the motor but move the machine away from this
area.
Do not start the engine in a closed environment. The exhaust gas contains lethal carbon monoxide.

CONTROL DESCRIPTION

A. Engine Stop Lever: it is red and cuts out power to the machine at the end of working or when a problem
occurs.
B. Clutch control lever.
C. Throttle control lever'
D. Speed control lever: the location of the different speeds are shown on the selector
E. P.T.O. lever. On the two-wheel tractors there is a safety device that prevents simultaneous engagement
of the rotary hoe with reverse speed
F. Spring for clutch and brake lever locking.
G. Handlebar height adjustment lever.
H. Rod or lever to adjust the handlebar steering column.
I.
Control lever for bar inclination.
41

Publicidad

Tabla de contenido
loading

Productos relacionados para MADER E-MT370C

Tabla de contenido