Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
This P.T.O. fitted on the machine PTO as an implement extension, takes out a 35mm splined shaft with this
same size of the tractors PTO's, according to DIN standards 9611.
By this shaft you can drive pulleys, universal joints and many other implements (fig 59)
TROUBLE SHOOTING
Do not perform any maintenance with engine on. Below are listed a few small difficulties which may occur
and which can be solved by the user.
1) Gasoline engine does not start.
Make the following checks in the order given.
The fuel tank is at least half full.
The fuel tap is open.
A cold motor must be chocked.
Fuel reaches the carburettor.
The breather hole in the fuel tank cap is not clogged.
The carburettor filter is clean.
Carburettor jets are clean. Screw them out to inspect them. And, if dirty, clean them with a blast of air.
The spark plug sparks. Take out the plug, reconnect it to its wire, touch the plug metal part to the metal part
54
Publicidad
Tabla de contenido
