Pneumatic Wheels; Steel Cage Wheels - MADER E-MT370C Manual De Instrucciones

PNEUMATIC WHEELS

They are particularly suitable for agricultural uses since the claw tread always provides good adherence of
the machine to the ground, either on hard or soft grounds.
The wheels 3.50-8 and 4.00-8 (fig 39) do not have the rim with adjustable track. However it is possible to
change the track inverting the assembly of the same wheels. The wheels 4.0-10, 5.0-10 and 5.0-12 have the
rim with adjustable track, which others two assembling possibilities with different tracks (fig 40).
When working with ploughs and ridgers it is advisable to mount wheels with a larger diameter (ex. 5.00-12).
Their larger diameter and their claw tread increase the adherence to the ground and their traction.
These wheels can be fitted also with the other implements: lawn mower, bars, etc., by fitting on the gear
box P.T.O. the implement extension or quick hitch, in order to avoid interferences between the wheels and
the implements.

STEEL CAGE WHEELS

These wheels are specially designed to be used with the two-wheel tractor mounting the rotary hoe on hard
ground.
The crosspieces on the wheels perimeter penetrate the ground, and assure good griping of the machine to
the earth, and prevent slippage. Cage wheels are profitable to use only in these conditions.
Otherwise it is better to use pneumatic wheels which, if there is no severe problem of adherence, give the
machine a steadier traction and form a flexible buffer between it and the ground. These wheels are
available with diameter 43cm.（see fig.43）
52