Kohler Dual Opto 1103128 Instrucciones De Servicio página 11

Motor Wiring Loom
Screw
Mini Circuit
Board
Motor
Mixer Valve
Install the New Motor Wiring Loom
Using the T20 torx driver, secure the new wiring loom mini
circuit board to the mixer valve assembly. Do not overtighten.
Connect the new wiring loom to the motor. Do not connect to the
circuit board at this time.
Kohler Co.
Connector Tab
Grommet
Motor Wiring Loom
Second Connection
(not all models)
11
Circuit
Board
1117891-9-B