Kohler Dual Opto 1103128 Instrucciones De Servicio página 7

Motor Wiring Loom
Screw
Mini Circuit
Board
Motor
Mixer Valve
Remove the Old Motor Wiring Loom
Disconnect the wiring loom from the motor.
Using the T20 torx driver, remove the screw securing the mini
circuit board to the mixer valve.
Discard the old wiring loom.
Kohler Co.
Connector Tab
Grommet
Motor Wiring Loom
Second Connection
(not all models)
7
Circuit
Board
1117891-9-B