Condenser; To Remove The Condenser - Candy GO DC58GF Manual De Instrucciones

All manuals and user guides at all-guides.com
40006203Eng.qxd 02/12/2009

Condenser

16
16:33 Page 16
Important: Always switch off and remove the
plug from the electricity supply before
cleaning the condenser.
To maintain the efficiency of the dryer regularly
check that the condenser is clean.
To remove the
condenser
1. Remove the kickplate (see page 15).
2. Turn the two locking levers anti-clockwise
and pull out the condenser.
3. Pull out the condenser unit.
4. Gently remove any dust or fluff with a
cloth, then wash the unit by holding it
under a running tap turning it so that
water flows between the plates, to
remove any dust or fluff.
5. Refit the condenser ensuring it is in the
correct way (as indicated by the arrow)
and pushed firmly into place. Lock the
two levers by turning them clockwise.
6. Refit the kickplate.