Technical Data; Protecting The Environment - Stanley FATMAX FME821 Manual Del Usuario

ENGLISH (Original instructions)
No-Volt
The No-volt function stops the grinder restarting without the
switch being cycled if there is a break in the power supply.
Hints for optimum use
Firmly hold the tool with one hand around the side handle
u
and the other hand around the main handle.
When grinding, always maintain an angle of approx. 15°
u
between the disc and the workpiece surface.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
8
All manuals and user guides at all-guides.com

Technical data

Input voltage
Power input
Rated speed
Disc diameter
Disc bore
Max disc thickness
grinding discs
cutting discs
Spindle size
Weight
FME821
(Type 1)
230
V
AC
W 850
-1 12,000
min
mm 115
mm 22
mm 6
mm 3.5
M14
kg 2.1
L (sound pressure) 94.5 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 105.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN60745:
2
Surface grinding (a ) 9.9 m/s , uncertainty (K) 1.5 m/s
h,SG
2
Cutting-off (a ) 9.1 m/s , uncertainty (K) 1.5 m/s
h
2
Polishing (a ) 5.0 m/s , uncertainty (K) 1.5 m/s
h,P
2
Disc sanding (a ) 3.3 m/s , uncertainty (K) 1.5 m/s
h,DS
FME822
(Type 1)
230
850
12,000
125
22
6
3.5
M14
2.1
2
2
2
2