Jocel JC-432LNFI Manual De Instrucciones página 41

All manuals and user guides at all-guides.com
Before filling your Fridge/Freezer
Before storing foods in your Fridge/Freezer, turn the Fridge/Freezer on and wait for 24 hours, to make sure
it is working properly and to allow the Fridge/Freezer to fail to the correct temperature.
START Testing
1. Clean the parts of the refrigerator with lukewarm water containing a little neutral detergent and with
clear water and wipe them dry.
lectric parts of the refrigerator can only be wiped by dry cloth.
Notes: E
2.Turn on electricity. The compressor begins to work.
3.Open the door 30 minutes later, if the temperature in the refrigerator decreased obviously, it shows that
the refrigerator system works well. When the refrigerator operates for a period of time, the temperature
controller will automatically set the temperature within limits it opens.
The display is located in the middle of the refrigerator door. Please refer to the below figure for the layout.
introduction of the buttons
（1） Fridge: to set the refrigerator temperature
（2） Freezer: to set the freezer temperature
（3） Function: to choose functions of fast cooling, fast freezing, intelligence and vacation
（4） OK: to enter or to quit the existing function
Function setting
★ appliance connected to power at the first time
When the appliance is connected to power at the first time, the display will be lit for 2 seconds before
going normal and the appliance runs with intelligence function.
★display control
When the refrigerator door is closed and there is no button operation in 3 minutes, the display light
goes off.
When the display light is off, open the refrigerator door or click any button to light it up.
-40-