Care And Maintenance - Kärcher IVC 60/30 Tact2 Lp Manual Del Usuario

Ocultar thumbs Ver también para IVC 60/30 Tact2 Lp:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Inserting the waste hose
 Remove all 4 loops of the waste hose (length:
22 m).
Illustration
 Open the intake by a rotation to the left and pull it
out towards the bottom.
 Insert the waste hose as shown in the illustration.
 Insert the intake and lock it by clockwise rotation.
Illustration
 Pull down the waste hose 40-50 cm.
 Close the end of the waste hose by means of a ca-
ble tie.
ATTENTION
Risk of damage! Do not cover the supply and exhaust
air openings on the suction head.
ATTENTION
The two flat fold filters must never be removed during
vacuuming.
Rotating knob
Turning on the Appliance
 Plug in the mains plug.
 Switch on the appliance at the rotating knob.
Automatic filter cleaning
The appliance has an innovative double filter dedusting
that is particularly effective with fine dust. The flat folded
filters are automatically cleaned every 15 secods
through an air jet (pulsating sound).
Suction process
 Perform the suction process.
The vacuumed material only falls into the waste
hose when the device is switched off.
Check the filling level of the waste hose at regular
intervals, as the device does not shut off automati-
cally.
Illustration
 With light waste or in case of clogging: Pull out the
sheathed cable to open the flap on the outlet (only
possible when the device is switched off).
 Slightly pull down the waste hose, close it with 2 ca-
ble ties at a distance of 10 cm and cut it between
the cable ties.
 Dispose of the waste sack in accordance with the
legal requirements.
Note: With light waste the length of the waste sack can
be up to 2 m without it bursting.
Turn off the appliance
 Switch off the appliance at the rotating knob.
 Pull out the mains plug.
10
Operation
Appliance ON
Filter dedusting OFF
Appliance OFF
Appliance ON
Filter dedusting ON
After each operation
Remove the disposal system
 Lock parking brakes.
Illustration
 Remove the tin tub.
Illustration
 Pull the locks of the placement mechanics up.
 Pull the push handle upward. The disposal system
is unlocked and lowered.
Illustration
 Pull the disposal system out by the handle.
Cleaning the device
 Vacuum and wipe the appliance inside and outside
with a damp cloth.
Insert the disposal system
Illustration
 Reinsert the disposal system and lock it with the
push handle.
WARNING
Crush hazard. Never hold your hands be-
tween the disposal system and the inter-
mediate ring or put them near the lifting
mechanism while locking. Hold the dis-
posal system on the handle with one hand
and lock it by operating the push handle
with the other hand.
 Insert the tin tub.
Storing the Appliance
 Wind up the mains cable and hook it into the cable
hook.
 Wind the suction hose around the sliding bow.
 Insert the floor nozzle and the suction pipe into their
respective holder.
 Place the appliance in a dry room and secure it
from unauthorized use.
CAUTION
Risk of injury and damage! Observe the weight of the
appliance when you transport it.
 Release the park brakes and push the appliance by
the push handle.
 Grab the appliance by the chassis, not by the slid-
ing bow to load it.
 When transporting in vehicles, secure the appli-
ance according to the guidelines from slipping and
tipping over.
CAUTION
Risk of injury and damage! Note the weight of the appli-
ance in case of storage.
This appliance must only be stored in interior rooms.

Care and maintenance

DANGER
First pull out the plug from the mains before carrying out
any tasks on the machine.
– 2
EN
Transport
Storage

Publicidad

Tabla de contenido
loading

Tabla de contenido