Maintenance And Care; Cleaning The Device - Kärcher A 2206 X Manual De Instrucciones

The filter bag needs to be replaced more
frequently while sucking in fine dust,
sand, etc.
Please use the pre-separator accessory
(order no.2.863-139) to such in ash.
Vacuuming hard surfaces
Illustration
Insert the hard surface inlay into the floor
nozzle. The bristles should point towards the
front.
Vacuuming carpeted floors
Work without the hard surface insert.
Blowing function
Use this function, for example, to blow out
leaves or dust from the garage, hobby room,
work shop, courtyard or garden.
Illustration
Connect connection hose. Open the
slide of the air regulation, and select the
desired blowing performance.
Wet vacuum cleaning
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at
a higher speed. Switch off the appliance im-
mediately and empty the container.
Finish operation
Illustration
Turn off the appliance and disconnect
the mains plug.
Illustration
Empty the container
Press the unlocking mechanism by foot
and remove the vacuuming device from
the chassis.
Illustration
Remove the motor casing and empty the
container.
Insert the vacuuming device in the chas-
sis - the container is self-locking.
All manuals and user guides at all-guides.com
Illustration
Storing the Appliance
Transporting the device
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Place the accessories in the appropriate
compartments at the appliance and store
the appliance in a dry room.
The large wheels facilitate transportation
on stairs; hold the device at the transport
handle while doing so.
Note: Never transport the device at the
handle of the vacuuming device; risk of
tilting!
The device is to be fastened properly be-
fore transporting the device in the car.
Note: We recommend that you first re-
move the vacuuming device from the
chassis.

Maintenance and Care

Risk of injury

Cleaning the device

Caution
Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
Rinse, if required, the container and ac-
cessories with water properly and dry
them before reuse.
9
English