Cable Connection - JVC TK-C205VP Manual Del Usuario

English
Fall prevention
• The ceiling to mount the camera has to be strong enough to support the weight of this
product.
If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling
before installation.
• Be sure to tighten the screws or nuts securely, Insufficient tightening may cause the
unit to fall from its mount.
• To avoid unforeseen accidents, attach the safety cable. Otherwise, there is nothing to
prevent the camera from falling should it come loose.
8 mm
2 mm
Pipe
Safety cable

Cable connection

Power Supply cable Coaxial cable
All manuals and user guides at all-guides.com
Seal tape
15
12mm ( / ")
32
or less
Attachment screws
Use screw size suitable for the mounting
3
holes (ø5 mm ( / ")).
16
Connecting the safety cable
• To prevent dropping, connect the unit to a
sturdy location (ceiling slab or channel)
and safety cable.
• For the used safety cable, pay particular
caution to the length, strength, pull, mate-
rial (insulation), etc.
• Always use the M4 screws mounted on
the unit.
Do not cross the power supply cable and
coaxial cable.